Strutconfigurator
System · cable tray supports

Cable tray supports: tray and supports in one go

A cable tray is only finished once it is supported. Which support, at what spacing, from which soffit? The configurator puts tray, supports and cables into one bill of materials.

Short answer

Cable tray is supported on trapeze brackets from threaded rod, on cantilever arms along a wall or on a centre hanger. Support spacing is usually between 1.2 and 1.5 m (rule of thumb); the tray manufacturer gives the permitted span for your tray and load. Also place a support close to every bend and coupler.

Cable tray supports: tray and supports in one go1,5001,500300Cable tray 300×60perforated, pre-galvanisedSectionfill 38%Support spacing1,500Scale1:25
cable tray supportsOwn drawing · to scale
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews

How do you hang cable tray from the soffit?

From a concrete soffit with a ceiling anchor and threaded rod, from steelwork with a beam clamp, and above a suspended ceiling from the structure above, never from the ceiling grid itself. One tray often needs only a centre hanger or a narrow trapeze; several trays above each other become a multi-tier trapeze.

What sizes of cable tray are there?

Choose the width on the cables that go in, with room for expansion, and the depth on the cable diameter. Lengths are usually 3 m.

Common cable trays
PropertyCommon
Width50, 75, 100, 150, 200, 300, 400, 500, 600 mm (UK also 225, 450, 750, 900)
Depth35, 60 or 100 mm
Length3,000 mm (also 2,000 and 6,000)
Material thickness0.6 to 1.5 mm
Typeperforated, solid or click-fit

Source: catalogues from three manufacturers (brand-independent standard catalogue, 19/11/2026).

How full can a cable tray be?

A widely used rule of thumb is no more than 40% fill at installation, leaving room for expansion and heat dissipation; above 60% it gets tight. Use the cable fill tool to compare the cross-section of your cables with the usable cross-section of the tray. Segregate power and data with a divider or separate trays.

Which fittings belong with it?

45° and 90° bends, inside and outside risers, tees, reducers, couplers, dividers and covers. The configurator counts them per route, so the bill of materials includes fittings and the hold-down clamps on the beam.

Frequently asked questions

How far can you span a cable tray?

Usually 1.2 to 1.5 m between supports as a rule of thumb. The tray manufacturer gives the permitted span per tray and load; follow it.

Can you hang cable tray from a suspended ceiling?

No. Hang it from the structure above with threaded rod and an anchor or beam clamp. Ceiling grids are not designed for it.

What are the types of cable tray support?

Trapeze brackets on threaded rod, cantilever arms on walls or channel, centre hangers, floor-standing H-frames, wall brackets and roof supports. The configurator covers all of them.

How do you fix cable tray to a trapeze?

With a hold-down clamp on the beam, so the tray cannot shift. The configurator counts the clamps.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day