Nine systems, one bill of materials
Each module in the configurator works out its own parts. Combine them: a trapeze with a ladder and a basket, cables inside, in one enquiry.
Strutconfigurator has modules for strut cut to length, trapeze brackets (1 to 4 tiers), H-frames, cantilevers and christmas trees, cable tray, cable ladder, cable basket, roof supports and data cables to length. Every configuration delivers a bill of materials, cutting list and drawing. Loads are indicative and based on manufacturer data.
- Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
- Privacy GDPR Data processing agreement available
- System Brand-independent Public version · client version on your own range
- Built by Built by NEXTRIQ 5.0 on Google · 22 reviews
Strut channel cut to length
41×21 to 41×82, cut in 50 mm steps
Read more →Trapeze bracket builder
1 to 4 tiers, M8 to M12
Read more →H-frame
Floor-standing frame with base plates
Read more →Cantilever arm and bracket
Wall and steelwork, christmas tree too
Read more →Cable tray supports
Support spacing, hangers and fittings
Read more →Cable ladder
60 to 150 mm side rail, up to 1,000 mm wide
Read more →Cable basket supports
On trapeze, wall or centre hanger
Read more →Roof supports
Strut on flat roofs
Read more →Data cables to length
Cat6A, fibre and MPO with the route
Read more →Which module do you use for what?
| Module | Use | Hangs from or stands on | Typical load |
|---|---|---|---|
| Trapeze | Containment and pipes on routes | Soffit or steelwork, on threaded rod | Light to heavy, per tier |
| H-frame | Routes over floors and roofs | Floor or roof blocks | Medium |
| Cantilever | Along walls, columns, shafts | Wall or wall channel | Light to medium, per arm |
| Christmas tree | Two routes on one upright | Soffit | Light |
| Cut strut | Loose channel cut to length | n/a | n/a |
| Roof supports | On flat roofs | Roof, no penetrations | Light to medium |
Typical use, not a design value. The configurator calculates indicatively per configuration; the manufacturer confirms.
See your own range in 3D.
In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.
Book a demo with Ismail
You see the configurator in your own brand and we discuss your range, systems and markets.
Reply from Ismail within one working day
Configure for free
A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.
Enquiry goes to a supplier · reply within one working day