Strutconfigurator
Prefab and offsite

Prefab supports: from configuration to pallet

Fewer fitters on site, more work in the workshop. Prefabrication only works when every position is right. The configurator delivers a drawing, bill of materials and cutting list per position, so the workshop can cut and assemble without redrawing.

Short answer

Prefabricated trapeze brackets are supports cut and assembled in a workshop and delivered to site per position. That requires a drawing, bill of materials and cutting list for every position. Strutconfigurator generates them from the configuration, so workshop and site work from the same data.

Prefab supports: from configuration to palletA12A13A14PALLET · 3 MODULES · BOM PER POSITIONPosition numberfrom drawing to pallet
Prefab and offsiteOwn drawing · to scale
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews

Why prefabricate?

The installation sector is growing but held back by labour shortages and grid congestion (Techniek Nederland, 2026). On site every hour is expensive and scarce. In a workshop you cut and assemble faster, more safely and with less waste. Data centre builders and large MEP contractors therefore increasingly work offsite.

What does a prefab workshop need?

A single, unambiguous set of data per position, so nobody has to re-measure or redraw.

  • A position number that matches on drawing, bill of materials, pallet and site drawing
  • A cutting list per channel, optimised on 6 m lengths
  • A bill of materials per position with every nut, washer, channel nut and clamp
  • A drawing with dimensions, tiers and drop
  • An indicative load per position, confirmed by the manufacturer

How does it work with the configurator?

The job preparer configures brackets or frames per route and numbers each position. The configurator combines the cutting lists of all positions, so the workshop can cut per channel and per length. The bill of materials per position travels with the pallet. For the manufacturer or wholesaler this means one complete order instead of a pile of loose items.

What the configurator delivers per position
OutputFor whomFormat
Dimensioned drawingworkshop and sitePDF
Cutting list, optimised on 6 mcutting shopPDF
Bill of materials per positionworkshop and purchasingPDF
Enquiry with configurationsupplieremail or integration

Frequently asked questions

What is prefabricated MEP?

Installation parts made and assembled in a workshop in advance, such as trapezes, frames and pipe modules, and placed on site per position.

Does Strutconfigurator supply prefab brackets itself?

No. The configurator supplies the data per position. Assembly is done by your workshop, your supplier or an assembly partner.

Can I order several positions at once?

Yes, the enquiry combines the positions with their bills of materials and the overall cutting list.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day